Phoenix Technology Group Co., Ltd.
Main products:Cable Lug,Cable Accessories,Silicon Rubber Insulator,Arrester,Cable Ties
Products
Contact Us
  • Contact Person : Mr. Jiang Howser
  • Company Name : Phoenix Technology Group Co., Ltd.
  • Tel : 86-577-61756178
  • Fax : 86-577-61753138
  • Address : Zhejiang,Yueqing,Jiaxi Industrial Zone, Liushi Town, Yueqing City, Zhejiang Province. China
  • Country/Region : China
  • Zip : 325604

Fuse Series

Fuse Series
Product Detailed
Related Categories:Fuses
Related Product Searches:Fuse Series,High Quality,Fuse,FH HFH
Outdoor high voltage protective devices. High quality, perfect performance, easy installation.

General

1.       Drop-out fuse and load-drawing drop-out fuse are the outdoor high voltage protective devices. They are mounted on the high voltage side of distribution transformer or main or branch distribution circuits, to protect against short circuit and overload and make and break load current of transformer and circuit.

2.       Hereinto, drop-out fuse is made up of insulator support and fuse tube, its static contact is mounted at both ends of insulator support, and the moving contact is mounted at the noth terminals of fuse tune that is composed of inner arc extinguishing tube and outer phenol aldehyde laminated paper tuber or epoxy glass cloth tube, The load-drawing drop-out fuse is provided with additional reiforced auxiliary contact and arc chute, which are used to make and break the load current.

3.       When the drop-out fuse works normally, the fuse tube forms the closing position by suing the tension of fuse wire. If the system has the troble, the fault current will cause that the fuse is blown out rapidly, and bring electric arc, the arc exitinguishing tube is heated for arc, to decompose much gas, and produce high pressure in the tube.

4.       Longitudinally blown arc is formed along the pipeline, and the arc is exinguished for rapid lengthening. After the fuse wire is blown out, the lower moving contact misses the pulling force and turns downwards, the locking mechanism releases the fuse tube to make it drop out and form the obvious breaking position.

5.         When need to draw the load, the moving contact is drawn out with the insulating rod, at this moment, the main moving and static contacts still keep contact, if need the insulation, the contact is also drawn out with the insulating rod, meanwhile, the auxiliary contact separates, thus, electric arc presents among auxiliary contacts, and the electric arc is drawn out in the slit of arc chute, at the same time, the arc chute produces the gas, when the current crosses zero, the electric arc is exitinguished.

Outline and Installation

Fuse Series



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.